Water treatment system at Fukushima plant stops for 7.5 hours, cause unknown

Tokyo Electric Power Co. (TEPCO) said a radioactive water treatment system at the Fukushima No. 1 Nuclear Power Plant stopped operating for 7.5 hours shortly after 8 a.m. on Aug. 7, prompting the Nuclear and Industrial Safety Agency (NISA) to instruct the utility to come up with preventative measures.

While the water treatment system was out of operation, processed water was used to cool down reactors, TEPCO, the operator of the crippled nuclear power station in Fukushima, said on Aug. 7. According to the utility, the trouble occurred in a water decontamination device developed by France’s Areva SA. It said one of the pumps used in two separate water treatment systems to inject chemicals aiding precipitation of radioactive cesium stopped operating. In a similar development, another pump also stopped operating due to a glitch on Aug. 4.

Internal investigations found that the pump stopped operating on Aug. 7 because sticky chemicals injected into it had put too much of a load on it. The pump’s operations resumed at around 3:30 p.m. on Aug. 7, after the amount of chemicals in each injection was reduced while the frequency of injections was increased. TEPCO suspects that the other pump may have stopped operating for the same cause on Aug. 4.

Each of the two water treatment systems has one pump for operations under normal conditions and a backup pump for use in times of trouble. The backup pumps in the two systems failed to operate on Aug. 4 and 7, respectively. Engineers are checking the system for the cause of the trouble.

Following a string of problems with the pumps, NISA instructed TEPCO to investigate the causes of the mishaps. The agency urged the utility to work out and submit preventative plans as well as to report a list of troubles other than those with the pumps.

At the same time, TEPCO for the first time started operating newly installed equipment to evaporate and concentrate saltwater within two of its eight water-treatment systems. The equipment is used to reduce the volume of highly concentrated saltwater that comes from a desalination device within the water treatment system. The volume of highly concentrated saltwater coming from the desalination device is about 1.5 times as much as that of desalinated water. The volume of highly concentrated saltwater is said to be reduced to about 30 percent by using the newly installed equipment.

Like this content? Join our growing community.

Your support helps to strengthen independent journalism, which is critically needed to guide business and policy development for positive impact. Unlock unlimited access to our content and members-only perks.

Most popular

Featured Events

Publish your event
leaf background pattern

Transforming Innovation for Sustainability Join the Ecosystem →